Application
Wide variable-pitch bimetal bandsaw blades handle the hardest metal-cutting tasks — structural steel, solid bar, and large-section non-ferrous — with reduced harmonic vibration for longer bandsaw blade life on heavy production work.
Bandsaw Blade Width: 3/4"
A 3/4" bandsaw blade is a step up in rigidity — suited to straight ripping, light resawing, and cutting thick sections where a narrower bandsaw blade would deflect. Ideal for floor-standing saws with adequate wheel diameter, offering excellent cut quality on through-cuts.
TPI: 10–14 TPI (variable pitch)
Variable pitch — very low vibration on thin steel section, ERW tube, and sheet.
Keep at least 3 teeth in contact with the workpiece at all times for efficient cutting and to avoid stripping tooth tips. For thin-wall or variable-section material, variable-pitch bandsaw blades reduce harmonic vibration and extend bandsaw blade life.
Bandsaw Blade Length: 2590.8mm
At 2590.8mm, this is a large bandsaw blade typically found on heavy-duty industrial bandsaws used in timber yards, sawmills, and metal fabrication shops. If you are unsure of your bandsaw blade length, measure the existing blade end-to-end before it is looped.
If your saw requires a slightly different bandsaw blade length, enter your exact measurement in our configurator — we cut bandsaw blades to any length within our range. The loop length is always measured with the bandsaw blade ends joined as they run on the machine.
How to Order This Bandsaw Blade
Click Add to Basket above to add this exact Bimetal bandsaw blade — 2590.8mm, 3/4" wide, 10/14 TPI — straight to your basket. Need a different bandsaw blade length or specification? Use the bandsaw blade configurator to enter your own exact measurement. We cut every bandsaw blade to order and dispatch with fast UK delivery.
Similar Bimetal Bandsaw Blades
Other Bimetal bandsaw blade sizes available to order cut to size: